1const e=`<h3><strong>Gear changing - down (automatic transmission) (manual selection)</strong></h3> 2 3<p><img alt="Placeholder image" height="494" src="/assets/book-pages/Images/4.png"></p> 4 5<p>1. Check rear view mirror(s).</p> 6 7<p>2. Release accelerator pedal smoothly.</p> 8 9<p>3. Brake if necessary to appropriate speed for circumstances. (Braking shall be completed before gear changing down)</p> 10 11<p>4. Select gear.</p> 12 13<p>5. Replace hand to appropriate position on steering wheel.</p> 14 15<p><strong>Note A: </strong></p> 16 17<p>If the speed of the vehicle increases considerably without application of the accelerator and if continuous use of the service brake is necessary, brake to the appropriate speed before a lower gear is engaged in order to minimise an increase in speed. Repeat this procedure as necessary. Avoid selecting a lower gear to assist or replace braking in order to reduce the speed of the vehicle.</p> 18 19<p><strong>Note B: </strong></p> 20 21<p>Gears should be changed, where possible, whilst travelling on a straight course.</p> 22 23<p><strong>Note C: </strong></p> 24 25<p>An appropriate gear shall be selected before descending a steep gradient.</p> 26`;export{e as default};
Line numbers count LF bytes from the start of the resource, as the search results do. Vendor segments are library code the classifier recognised; they are stored but not indexed. Bytes are shown as Latin1 characters, one per byte.