PageSourceSearch

https://k53rsa.co.za/assets/page_149-Cl-jtcNF.js

js k53rsa.co.za collected 2026-10-04 13:25:32 UTC 1,606 bytes, 48 lines download raw bytes

1const e=`<h3><strong>Stopping - for parking (automatic transmission)</strong></h3>
2
3<p><img alt="Placeholder image" src="/assets/book-pages/Images/106.png"></p>
4
5<p>1. Check rear view mirror(s) and appropriate blind spot.</p>
6
7<p>2. Signal intention.</p>
8
9<p>3. Check appropriate blind spot, if applicable.</p>
10
11<p>4. Position vehicle, if necessary.</p>
12
13<p>5. Check rear view mirror(s).</p>
14
15<p>6. Decelerate.</p>
16
17<p>7. Brake.</p>
18
19<p>8. Obtain and/or maintain a clear space behind or alongside obstruction or other road user.</p>
20
21<p>9. Stop in accordance with road traffic signs, signals, rules and markings.</p>
22
23<p>10. Apply parking brake.</p>
24
25<p>11. Select “P” position.</p>
26
27<p>12. Cancel signal and switch off accessories, if applicable.</p>
28
29<p>13. Switch off engine.</p>
30
31<p>14. Check rear view mirror(s) and blind spots before opening doors.</p>
32
33<p><strong>Note A: </strong></p>
34
35<p>Turn the front wheels in the direction of the kerb as a precautionary measure to prevent the vehicle from moving, depending upon the gradient of the road.</p>
36
37<p><strong>Note B: </strong></p>
38
39<p>If a turbo is fitted, refer to operators manual.</p>
40
41<p><strong>Note C: </strong></p>
42
43<p>A combination of vehicles may be “cranked” when parking, in order to limit clutch slipping and wear when moving off, as long as this action can be done with complete safety.</p>
44
45<p><strong>Note D: </strong></p>
46
47<p>If the vehicle is equipped with a foot-operated parking brake the sequence shall be to select neutral, with service brake depressed and then to apply the parking brake.</p>
48`;export{e as default};

Line numbers count LF bytes from the start of the resource, as the search results do. Vendor segments are library code the classifier recognised; they are stored but not indexed. Bytes are shown as Latin1 characters, one per byte.